New for OEM 7.04
This section describes the new features, logs and commands in OEM 7.04.
Documents released: February 2018
Features
|
New feature |
Description |
|---|---|
|
PwrPak7D and PwrPak7D-E1 |
New OEM7 enclosures with excellent connectivity options, dual antenna inputs and internal memory for log collection. Information about the new OEM7 enclosures has been added, including information about:
|
|
Interference Toolkit feature expansion |
Interference Toolkit provides two types of interference detection. Spectral Analysis Detection (for in band, near band or strong out of band interference) and Statistical Analysis Detection (for out of band interference). |
Firmware OEM 7.04.00 does not support the OEM7600.
Commands
|
New command |
Description |
|---|---|
|
This command deletes a single file, or all files, from the logging directory of the currently selected file media. |
|
|
This command configures ALIGN for a SPAN base receiver to a secondary rover receiver. |
|
|
This command is used to enable or disable automatic interference detection on the receiver. |
|
|
This command configures the Calibrated Antenna Gain (CAG). |
|
Changed command |
Description |
|---|---|
|
Changed the clock synchronization resolution. |
|
|
The minimum value for the Time field was changed. |
|
|
New antennas and radomes were added. |
|
|
Added information about SCOM ports. |
|
|
Updated the default for the power_mode field in this command. |
|
|
A FRESET STANDARD command does not erase profile information. |
|
|
Several changes for use of this command were added. |
|
|
Added information about SCOM ports. Updated the factory default values. |
|
|
The mode is now set per frequency band. |
|
|
Updated the timeavg field in this command. |
|
|
Added information about SCOM ports. |
|
|
User data is entered in hexadecimal. |
|
|
Added information about SCOM ports. |
|
|
Subscription limit is now based on subscription and receiver model. |
|
|
New antennas and radomes were added. |
|
Deleted command |
Description |
|---|---|
|
DUALANTENNAPORTCONFIG |
This command has been replaced by the INSALIGNCONFIG command. This new command provides additional functionality. |
|
ITINTERFERENCEDETECT |
This command has been replaced by the ITDETECTCONFIG command. |
Logs
|
New log |
Description |
|---|---|
|
This log lists all of the detected interferences from all active paths where interference detection is enabled. |
|
|
This log contains details on the Oceanix subscription. |
|
|
This log contains status information for the Oceanix decoder and subscription. |
|
|
This log contains the raw SBAS frame data (version 2). |
|
Changed log |
Description |
|---|---|
|
Added information about embedded Auth Codes. |
|
|
Added OEM7500 information. |
|
|
Added information about power levels reported. |
|
|
Changes made to the Node Status field of this log. |
|
|
Changed how SPAN options are represented. |
|
|
Updated the Tracking Status table for this log. |
|
|
IMU measurement outlier detected status was added as Bit 31 of the Auxiliary 1 Status word. New antenna gain states were added to the Auxiliary 2 Status word. SCOM buffer overrun added to Auxiliary 3 Status word. Auxiliary 4 Status word added. |
|
|
Several changes were made to the information for this log. |
|
|
Updated the Decoder Data Synchronization State table. |
|
|
Updated the Decoder Data Synchronization State table. |
|
|
Added information about embedded Auth Codes. |