RAWSBASFRAME2
Raw SBAS frame data 2
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
This log contains the raw SBAS frame data of 226 bits (8-bit preamble, 6-bit message type and 212 bits of data but without a 24-bit CRC). It also contains the transmitted frequency. Only frame data with a valid preamble and CRC are reported.
Message ID: 2185
Log Type: Asynch
Recommended Input:
log rawsbasframe2a onnew
ASCII Example:
#RAWSBASFRAME2A,USB1,0,48.5,SATTIME,2209,512947.000,02000020,b39f,16809;135,160,1,0,0,3,9a0c9ffc00ffe9ffc033ffc005ffdffc121ffc00403ba2b9b97bbb95c0*4e57856f
The RAWSBASFRAME2 log output contains all the raw data required for an application to compute its own SBAS correction parameters.
|
Field |
Field Type |
Description |
Format |
Binary Bytes |
Binary Offset |
|---|---|---|---|---|---|
|
1 |
Log header |
RAWSBASFRAME2 header For information about log headers, see ASCII, Abbreviated ASCII or Binary. |
|
H |
0 |
|
2 |
PRN |
SBAS satellite PRN number |
Ulong |
4 |
H |
|
3 |
signal channel |
Signal channel number that the frame was decoded on |
Ulong |
4 |
H+4 |
|
4 |
SBAS Signal Source |
Identifies the source of the SBAS signal: 1 – SBASL1CA 2 – SBASL5I |
Uchar |
1 |
H+8 |
|
5 |
SBAS Preamble Type |
Identifies what preamble was used when tracking the SBAS signal: 0 – 8-bit Preamble (3x8) 1 – 4-bit Preamble (6x4) |
Uchar |
1 |
H+9 |
|
6 |
Reserved |
Ushort |
2 |
H+10 |
|
|
7 |
SBAS frame ID |
SBAS frame ID |
Ulong |
4 |
H+12 |
|
8 |
data |
Raw SBAS frame data. There are 226 bits of data and 6 bits of padding. |
Hex[29] |
321 |
H+16 |
|
9 |
xxxx |
32-bit CRC (ASCII and Binary only) |
Ulong |
4 |
H+48 |
|
10 |
[CR][LF] |
Sentence terminator (ASCII only) |
- |
- |
- |