ITDETECTSTATUS
Interference detection status
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
This log lists all of the detected interferences from all active paths where interference detection is enabled.
This log should be used with the onchanged trigger only.
To view the detected interferences from all active paths on the secondary antenna of dual antenna receivers (OEM7720, PwrPak7D, PwrPak7D-E1, PwrPak7D-E2 and CPT7), log ITDETECTSTATUS_1.
Message ID: 2065
Log Type: Asynch
Recommended Input:
log itdetectstatusa onchanged
ASCII Example
#ITDETECTSTATUSA,USB2,0,74.0,FINESTEERING,1982,430605.267,0200c000,7fdb,32768;3,
L1,STATISTICANALYSIS,-0.718,29.167,0.126,12.797,00000000,00000000,00000000,
L2,SPECTRUMANALYSIS,1249.961,71.191,-56.769,-132.907,00000000,00000000,00000000,
L2,SPECTRUMANALYSIS,1289.512,1.978,-75.967,-138.493,00000000,00000000,00000000*5e83b175
|
Field |
Field Type |
Description |
Format |
Binary Bytes |
Binary Offset |
|---|---|---|---|---|---|
|
1 |
Log header |
ITDETECTSTATUS header For information about log headers, see ASCII, Abbreviated ASCII or Binary. |
- |
H |
0 |
|
2 |
# of entries |
Number of interferences to follow |
Ulong |
4 |
H |
|
3 |
RF Path |
RF path for this entry. 2 = L1 3 = L2 5 = L5 |
Enum |
4 |
H+4 |
|
4 |
Interference detection type |
Interference detection type for this entry. 0 = SPECTRUMANALYSIS 1 = STATISTICALANALYSIS |
Enum |
4 |
H+8 |
|
5 |
Parameter 1 |
The first parameter of the interference. For SPECTRUMANALYSIS type, this is the center frequency in MHz. For STATISTICALANALYSIS type, this is reserved. |
Float |
4 |
H+12 |
|
6 |
Parameter 2 |
The second parameter of the interference. For SPECTRUMANALYSIS type, this is the bandwidth in MHz. For STATISTICALANALYSIS type, this is reserved. |
Float |
4 |
H+16 |
|
7 |
Parameter 3 |
The third parameter of the interference. For SPECTRUMANALYSIS type, this is the estimated power in dBm of the interference. For STATISTICALANALYSIS type, this is reserved. |
Float |
4 |
H+20 |
|
8 |
Parameter 4 |
The fourth parameter of the interference. For SPECTRUMANALYSIS type, this is the highest estimated power spectrum density in dBmHz of the interference. For STATISTICALANALYSIS type this is reserved. |
Float |
4 |
H+24 |
|
9 |
Reserved 1 |
Reserved |
Ulong |
4 |
H+28 |
|
10 |
Reserved 2 |
Reserved |
Ulong |
4 |
H+32 |
|
11 |
Reserved 3 |
Reserved |
Ulong |
4 |
H+36 |
|
12 |
Next interference signal offset = H + 4 + (#entries * 36) |
||||
|
13 |
xxxx |
32-bit CRC (ASCII and Binary only) |
Ulong |
4 |
H=4+ (#entries * 36) |
|
14 |
[CR][LF] |
Sentence terminator (ASCII only) |
- |
- |
- |
|
RF Path |
OEM719, OEM729, |
OEM7720, |
OEM7500, |
OEM7600 |
|---|---|---|---|---|
|
L1 |
GPS L1 GLONASS L1 Galileo E1 BDS B1 QZSS L1 SBAS L1
|
GPS L1 GLONASS L1 Galileo E1 BDS B1 QZSS L1 SBAS L1
|
GPS L1 GLONASS L1 Galileo E1 BDS B1 QZSS L1 SBAS L1 LBand |
GPS L1 GLONASS L1 Galileo E1 BDS B1 QZSS L1 SBAS L1
|
|
L2 |
GPS L2 GLONASS L2 Galileo E6 BDS B3 QZSS L2/L6
|
GPS L2/L5 GLONASS L2/L3 Galileo E5 BDS B2 QZSS L2/L5 NavIC L5 SBAS L5 |
GPS L2/L5 GLONASS L2/L3 Galileo E5 BDS B2 QZSS L2/L5 NavIC L5 SBAS L5 |
GPS L2/L5 GLONASS L2/L3 Galileo E5 BDS B2 QZSS L2/L5 NavIC L5 SBAS L5 |
|
L5 |
GPS L5 GLONASS L3 Galileo E5 BDS B2 QZSS L5 NavIC L5 SBAS L5 |
|
|
|
|
LBAND |
LBand |
LBand |
|
LBand |