THISANTENNATYPE
Sets the antenna type of this receiver
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700 |
Use the THISANTENNATYPE command to set the type of antenna being used with the receiver. There are two sources of antenna information:
- An internal table
The firmware contains a set of predefined antenna and radome types taken from the IGS ANTEX file. Refer to Table: Antenna Type and Table: Radome Type for the antennas currently supported. - User-defined antennas
User-defined antenna types can be entered using the ANTENNATYPE command.
The BASEANTENNATYPE command is used to set the RTK base antenna type.
Message ID: 1420
Abbreviated ASCII Syntax:
THISANTENNATYPE AntennaType [RadomeType]
ASCII Examples:
THISANTENNATYPE NOV702
THISANTENNATYPE USER_ANTENNA_1
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
|
1 |
Command header |
- |
- |
THISANTENNATYPE header This field contains the command name for abbreviated ASCII or the message header for ASCII (see page 1) or Binary (see page 1). |
- |
H |
0 |
|
2 |
AntennaType |
Antenna type |
Enum |
4 |
H |
||
|
3 |
RadomeType |
Radome type |
Enum |
4 |
H+4 |
||