New for OEM 7.04.01

This section describes the new features, logs and commands in OEM 7.04.01.

Documents released: July 2018

Features

New feature	Description
OEM7600	A new, small form factor, receiver card with the same connector as the OEM7700. The OEM7600 RF shield features built-in mounting features. Information about the OEM7600 has been added, including information about: Overview Installation Operation Configuration Technical Specifications

New feature

Description

OEM7600

A new, small form factor, receiver card with the same connector as the OEM7700. The OEM7600 RF shield features built-in mounting features.

Information about the OEM7600 has been added, including information about:

Changed command	Description
ADJUST1PPS	Added the signals available on the OEM7600.
COMCONTROL	Added the signals available on the OEM7600.
CONNECTIMU	Added a note that the OEM7600 supports SPI, COM4 and COM5.
ECHO	Added the OEM7600.
EVENTINCONTROL	Added that the OEM7600 supports MARK3 and MARK4.
EVENTOUTCONTROL	Added that the OEM7600 supports MARK1 to MARK4.
MARKCONTROL	Added that the OEM7600 supports MARK3 and MARK4.
SERIALCONFIG	Added the COM ports supported by the OEM7600.
SERIALPROTOCOL	Added that the OEM7600 not have a COM port that can be set to RS-422 using this command.
SETUPSENSOR	Added that the OEM7600 supports MARK3 and MARK4

Changed log	Description
HWMONITOR	Added OEM7600 information.
MARKPOS, MARK2POS, MARK3POS and MARK4POS	Added that the OEM7600 supports MARK3 and MARK4.
MARK1TIME, MARK2TIME, MARK3TIME and MARK4TIME	Added that the OEM7600 supports MARK3 and MARK4.
PASSCOM, PASSAUX, PASSUSB, PASSICOM, PASSNCOM	Added that the OEM7600 supports PASSCOM4 and PASSCOM5. Added parameters in Auxiliary 4 Status word.