New for OEM 7.05.01
This section describes the new features, logs and commands in OEM 7.05.01.
Documents released: November 2018
Features
|
New product |
Description |
|---|---|
|
SMART7 |
The SMART7 is a multi-frequency GNSS Smart antenna with an Agriculture optimized firmware release. Information about the SMART7 has been added, including information about the following available models:
|
|
RELAY7 |
The RELAY7 is an RTK rover radio module for NovAtel's SMART7 antennas. |
Commands
|
New command |
Description |
|---|---|
|
Configures the Satel 400 MHz radio for the SMART7 with RELAY7 |
|
|
Configures the Satel 900 MHz radio for the SMART7 with RELAY7 |
|
|
Configures the 900 MHz radio network for the SMART7 with RELAY7 |
|
|
Configures the 900 MHz radio network for the SMART7 with RELAY7 |
|
|
Controls radio operations for the SMART7 with RELAY7 |
|
|
Detects the connected Satel radio for the SMART7 with RELAY7 |
|
|
Detects the Satel radio on the COM port during startup for the SMART7 with RELAY7 |
|
|
ALIGN plug and play over Wi-Fi |
|
|
Sets the SSID of the Access Point when the receiver is configured to operate in either AP or CONCURRENT mode |
|
|
Configures access points to which client can connect |
Logs
|
New log |
Description |
|---|---|
|
Displays the Satel 400 MHz radio configuration settings for the SMART7 with RELAY7 |
|
|
Displays the Satel UHF radio configuration settings for the SMART7 with RELAY7 |
|
|
Delivers status updates for any asynchronous radio operations for the SMART7 with RELAY7 |
|
|
List of access points in range of client |
|
|
Displays current status of Wi-Fi module including connected clients and/or access point |