SATELDETECT
Detects the connected Satel radio
|
Platform: |
SMART7 with RELAY7 |
This command is used to detect the Satel radio connected to the serial port. Detection is only required to configure the radio settings. If previously configured, the radio can provide RTK corrections without issuing the SATELDETECT command.
Logging SATELSTATUS command onchanged provides a notification of the completion of detection. If no radio is detected at the default baud rate of 38400, the RIL will attempt at additional baud rates (115200, 9600). If a radio is detected, the baud rate of the radio will be changed to 38400. Upon detection, the radio identity (version block) and settings (SATEL4INFO command and SATEL9INFO command) will be queried. Regardless of the presence of a radio, the final state of the given serial port will be baud rate=38400, data bits=8, parity bits=N, stop bits=1. Interfacemode will be returned to its setting before SATELDETECT was issued.
Message ID: 2204
Abbreviated ASCII Syntax:
SATELDETECT COMPort
ASCII Example:
SATELDETECT COM3
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
|
1 |
Command header |
- |
- |
SATELDETECT header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary. |
- |
H |
0 |
|
2 |
port |
Port to attempt detection (default=COM3) |
Enum |
4 |
H |
||