SATELSTARTUPDETECT

Detects the Satel radio on the COM port during startup

Platform:

SMART7 with RELAY7

This command is used to detect the Satel radio connected to the COM port during system startup. Detection functions the same as if the SATELDETECT command was issued. SATELDETECT automatically begins at the next startup when the SATELSTARTUPDETECT command is used.

The SAVECONFIG command must be issued to set this command parameters.

Message ID: 2221

Abbreviated ASCII Syntax:

SATELSTARTUPDETECT Switch COMPort

ASCII Example:

SATELSTARTUPDETECT Enable COM3

Field	Field Type	ASCII Value	Binary Value	Description	Format	Binary Bytes	Binary Offset
1	Command header	-	-	SATELSTARTUPDETECT header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary.	-	H	0
2	switch	Enable	-	Switch to enable detection (default=Disable)	Enum	4	H
		Disable	-
3	port	See Table: COM Port Identifiers		Port to attempt detection (default=COM3)	Enum	4	H+4