View a File In Playback

When a file is loaded, the Playback window changes to show the information stored in the loaded log file.

Files Bar

The Files bar appears at the top of the Playback window. This bar shows the file names of all of the log files currently loaded into Playback.

The log file that is currently being viewed is black. To view a different log file, click the tab on the Files bar for that log file.

To close a log file, click the X button on the log file tab.

Summary Bar

The Summary bar provides status information about the receiver. As the log file is played back, the information on the Summary bar changes to show the status of the receiver at the current point within the log file.

Status Indicator

A colored bar with text indicates the status of the summary information shown.

Color	Text	Description
Green	Good	The receiver is functioning and there are no warnings or errors.
Amber	Warning	The receiver is functioning, but there are one or more issues that may require attention.
Red	Error	An issue is preventing the receiver from functioning. The Error state will remain until the situation is resolved.

If the receiver has a warning or error, check the status tiles. An amber or red bar appears on the status tile where more information about the warning or error can be found.

Position

The Position field shows all of the positioning types configured on the receiver. The positioning type that is currently being used to calculate the position is highlighted in a box.

Latitude

The Latitude field shows the latitude of the calculated position in degrees.

Longitude

The Longitude field shows the longitude of the calculated position in degrees.

SPAN

The SPAN field shows the status of SPAN GNSS+INS technology.

Height

The Height field shows the height above mean sea level of the calculated position in metres.

Model

The Model field shows the receiver type.

CPU Usage

The CPU Usage field shows the amount of receiver computing (CPU) power currently being used.

Logging

The Logging field shows the status of logging to the receiver's internal memory.

Time

The Time field shows the current UTC time.

Storage Usage

The Storage Usage field shows the amount of receiver internal memory that has been used.

Interference

The Interference field indicates if the receiver has detected interference in the GNSS signal.

Status Tiles

The status tiles show the information that is stored in the log file. As a file is played back, the information on the status tiles changes to reflect the information at the current point in the log file.

For descriptions of the status information shown on the tiles, refer to the following:

• Positioning Status

• Satellite View

• Ports Status

• Logging Status

• Device Status

• Interference Status

• ALIGN Status

• SPAN Status

• Radio Status

The tiles available vary depending on the type of receiver and the software features enabled.

Each tile provides a color coded bar to indicate overall status of the information on that tile.

Color	Text	Description
Green	Good	The receiver is functioning and there are no warnings or errors.
Amber	Warning	The receiver is functioning, but there are one or more issues that may require attention.
Red	Error	An issue is preventing the receiver from functioning. The Error state will remain until the situation is resolved.
Gray	Off	The feature has been disabled or has not yet been configured.