TIMESYNC
Synchronize time between GNSS receivers
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
The TIMESYNC log is used in conjunction with the ADJUST1PPS command to synchronize the time between GNSS receivers.
Message ID: 492
Log Type: Synch
Recommended Input:
log timesynca ontime 1
ASCII Example:
#TIMESYNCA,USB1,0,50.0,FINESTEERING,2209,515196.000,02000020,bd3f,16809;2209,515196000,FINESTEERING*bd19b2d0
The time data embedded in this log represents the time of the most recent 1PPS signal. Refer to Figure: 1PPS Alignment to see the alignment between a Fine and a Cold Clock receiver. Also refer to Transferring Time Between Receivers.
|
Field |
Field type |
Description |
Format |
Binary Bytes |
Binary Offset |
|
1 |
Log header |
TIMESYNC header For information about log headers, see ASCII, Abbreviated ASCII or Binary. |
|
H |
0 |
|
2 |
week |
GPS reference week number |
Ulong |
4 |
H |
|
3 |
ms |
Number of milliseconds into the GPS reference week |
Ulong |
4 |
H+4 |
|
4 |
time status |
GPS reference time Status, see Table: GPS Reference Time Status |
Enum |
4 |
H+8 |
|
5 |
xxxx |
32-bit CRC (ASCII and Binary only) |
Ulong |
4 |
H+12 |
|
6 |
[CR][LF] |
Sentence terminator (ASCII only) |
- |
- |
- |