RELAY7 Connector Overview

The RELAY7 uses the same cable for power and communication as the SMART7. Use the Ampseal connector at the front of RELAY7 to connect to the SMART7. Refer to Table: RELAY7 Connector Pin Outs for cable pin outs.

RELAY7 Interface Connector

RELAY7 RTK Radio Mount

The RELAY7 internal 400 MHz or 900 MHz radio can be used to receive RTK corrections from a compatible base station. An external antenna must be connected to the back of the RELAY7.

Refer to Connect the RELAY7 to the Radio Antenna Mount for connection instructions.