WIFISTATUS
Display status information of receiver Wi-Fi
|
Platform: |
PwrPak7, SMART7-I, SMART7-SI, SMART7-W |
PwrPak7M and PwrPak7Q variants do not support this command.
Use this log to display the current status of a Wi-Fi Client and or Access Point in addition to information about any connected Access Point and or Clients.
Message ID: 2207
Log Type: Asynch
Recommended input:
log wifistatus onchanged
ASCII Example:
#WIFISTATUSA,USB1,0,50.0,UNKNOWN,0,8.029,02000020,8a58,16809;ACCESSPOINT_OPERATIONAL,"",0,0,"",OPEN,0*dfc10e04
|
Field |
Field Type |
Description |
Format |
Binary Bytes |
Binary Offset |
|---|---|---|---|---|---|
|
1 |
Log header |
WIFISTATUS header For information about log headers, see ASCII, Abbreviated ASCII or Binary. |
- |
H |
0 |
|
2 |
status |
Wi-Fi operational status. Refer to Table: Wi-Fi Status. |
String[Max 33] |
Variable |
H |
|
3 |
AP SSID |
SSID of connected access point. This field is blank if the client is not connected to an access point. |
String[Max 33] |
Variable |
|
|
4 |
AP RSSI |
Value of RSSI (dBm) of connection to access point. This field is zero if the client is not connected to an access point. |
Ulong |
4 |
|
|
5 |
AP channel |
Channel use to connect to access point. This field is zero if the client is not connected to an access point. |
Ulong |
4 |
|
|
6 |
AP BSSID |
MAC address of connected access point. This field is blank if the client is not connected to an access point. |
Ulong |
4 |
|
|
7 |
AP security |
Security mode of connected access point. See Table: Wi-Fi Security Type in the WIFINETLIST command. The value of this field is only valid if the AP SSID field is not blank. |
Enum |
4 |
|
|
8 |
#clients |
Number of clients connected to an access point to follow. |
Ulong |
4 |
|
|
9 |
BSSID |
MAC address of connected client. |
String[Max 18] |
Variable |
|
|
10... |
Next Client | ||||
|
Binary |
ASCII |
Description |
|---|---|---|
|
0 |
STARTUP |
|
|
1 |
OFF |
Wi-Fi hardware is powered off |
|
2 |
ON |
Wi-Fi hardware is powered on but not configured |
|
3 |
CONFIGURING_ACCESSPOINT |
Wi-Fi hardware is being configured as an access point |
|
4 |
ACCESSPOINT_OPERATIONAL |
Wi-Fi hardware is operating as an access point and is ready to accept client connections |
|
5 |
CONFIGURING_CLIENT |
Wi-Fi hardware is being configured as a client station |
|
6 |
CLIENT_OPERATIONAL |
Wi-Fi hardware is operating as a client but is not connected to an access point |
|
7 |
BOOTING_UP |
Wi-Fi hardware is booting up |
|
8 |
BOOTUP_COMPLETE |
Wi-Fi hardware has booted up |
|
9 |
UPGRADE_REQUIRED |
Wi-Fi firmware version does not match required version |
|
10 |
UPGRADING_FIRMWARE |
Wi-Fi firmware is being upgraded |
|
11 |
UPGRADING_FIRMWARE_10 |
Wi-Fi firmware update is 10% complete |
|
12 |
UPGRADING_FIRMWARE_20 |
Wi-Fi firmware update is 20% complete |
|
13 |
UPGRADING_FIRMWARE_30 |
Wi-Fi firmware update is 30% complete |
|
14 |
UPGRADING_FIRMWARE_40 |
Wi-Fi firmware update is 40% complete |
|
15 |
UPGRADING_FIRMWARE_50 |
Wi-Fi firmware update is 50% complete |
|
16 |
UPGRADING_FIRMWARE_60 |
Wi-Fi firmware update is 60% complete |
|
17 |
UPGRADING_FIRMWARE_70 |
Wi-Fi firmware update is 70% complete |
|
18 |
UPGRADING_FIRMWARE_80 |
Wi-Fi firmware update is 80% complete |
|
19 |
UPGRADING_FIRMWARE_90 |
Wi-Fi firmware update is 90% complete |
|
20 |
UPGRADING_FIRMWARE_COMPLETE |
Wi-Fi firmware update is 100% complete |
|
21 |
ERROR |
An error has occurred |
|
22 |
CONFIGURING_CONCURRENT |
Wi-Fi hardware is being configured to operate as both an access point and client concurrently |
|
23 |
CONCURRENT_OPERATIONAL |
Wi-Fi hardware is operating as both an access point and client. The client is not connected to an access point. |
|
24 |
CONNECTING_TO_AP |
Wi-Fi hardware is attempting to connect to an access point |
|
25 |
CONNECTED_TO_AP |
Wi-Fi hardware has successfully connected to an access point |
|
26 |
CONNECTION_FAILURE |
Wi-Fi client failed to connect to an access point. Possible causes include invalid password provided in the WIFINETCONFIG command |
|
27 |
CONFIGURING_NETWORK_PARAMETERS |
Wi-Fi client is configuring its network parameters based on active connection to an access point |
|
28 |
CONNECTION_REFUSED |
Wi-Fi client failed on initial attempt to connect to an access point due to the connection being actively refused by the access point Possible causes include invalid configuration settings in the WIFINETCONFIG command |
|
29 |
PREFERRED_NETWORK_MISCONFIGURED |
Wi-Fi client cannot connect to preferred access point due to a misconfiguration of network parameters in the WIFINETCONFIG command |
|
30 |
CONCURRENT_CONNECTING_TO_AP |
Wi-Fi concurrent client is configuring its network parameters based on active connection to an access point |
|
31 |
CONCURRENT_CONFIGURING_NETWORK_PARAMS |
Wi-Fi concurrent client is configuring its network parameters based on active connection to an access point |
|
32 |
CONCURRENT_CONNECTED_TO_AP |
Wi-Fi concurrent client has successfully connected to an access point |
|
33 |
DISCONNECTING_FROM_AP |
Wi-Fi client is disconnecting from an access point |
|
34 |
CONCURRENT_DISCONNECTING_FROM_AP |
Wi-Fi concurrent is disconnecting from an access point |
|
35 |
BOOTUP_CONNECTING_TO_WIFI_MODULE |
|
|
36 |
BOOTUP_ERROR |
|