PPPCONVERGEDCRITERIA
Configures decision for PPP convergence
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
The PPPCONVERGEDCRITERIA command sets the threshold that determines if the solution has converged for high-accuracy PPP solutions. These are the PPP solutions reported with the PPP and PPP_CONVERGING position types.
The convergence threshold for lower accuracy PPP solutions (reported with PPP_BASIC and PPP_BASIC_CONVERGING position types) is set using the PPPBASICCONVERGEDCRITERIA command.
Relaxing the convergence threshold shortens the time before a PPP solution is reported as converged. However, it does not alter solution behavior. During the initial PPP solution period, the positions can have decimetre error variation. Only relax the convergence threshold if the application can tolerate higher solution variability.
Message ID: 1566
Abbreviated ASCII Syntax:
PPPCONVERGEDCRITERIA criteria tolerance
Factory Default:
PPPCONVERGEDCRITERIA horizontal_stddev 0.32
ASCII Example:
PPPCONVERGEDCRITERIA total_stddev 0.15
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
|
1 |
Command header |
- |
- |
PPPCONVERGEDCRITERIA header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary. |
- |
H |
0 |
|
2 |
Criteria |
TOTAL_STDDEV |
1 |
Use the total, 3D, standard deviation |
Enum |
4 |
H |
|
HORIZONTAL_ |
2 |
Use the horizontal, 2D, standard deviation |
|||||
|
3 |
Tolerance |
|
|
Tolerance (m) |
Float |
4 |
H+4 |