RELAY7 mechanical specifications
In the following diagram, the dimensions are in millimetres.
RELAY7 dimensions
|
Mounting |
|---|
|
4 x M4 screw insert to SMART7 |
|
Integrated magnetic mount |
|
3 x M4 screws for attachment to mounting plate |
Hand fasten the M4 screws (x4). Bit required: M2.5 Hex, torque = 10 to 12 in-lb. Failure to properly install the four screws may cause damage.
Refer to RELAY7 cable routing to SMART7 for installation instructions.