Connect I/O Signals to a SMART2

The SMART2 has several outputs, also referred to as strobes, that provide status and synchronization signals.

  • Pulse Per Second (PPS) output (E2 on SMART Antenna Interface cable)

  • Emulated Radar Output (E2 on SMART Antenna Interface cable)

  • Event Mark Input (MKI) (E2 on SMART Antenna Interface cable)

To access the I/O signals, connect the interface cable or a custom made cable, to the main 14-Pin interface connector. Refer to SMART Antenna Interface Cable (Optional Accessory) for connector pin out and other details.