WIFIAPSETTINGS

Display the Wi-Fi access point configuration

Platform:

PwrPak7, SMART7-I, SMART7-SI, SMART7-W

PwrPak7M and PwrPak7Q variants do not support this command.

Use this log to display the Wi-Fi access point configuration. If the access point is not currently operational, the log reports the access point configuration to be applied the next time the WIFIMODE AP or WIFIMODE CONCURRENT command is received.

The term passkey and password are the same.

Message ID: 2093

Log Type: Polled

Recommended Input:

LOG WIFIAPSETTINGS

ASCII Example:

#WIFIAPSETTINGSA,USB1,0,49.5,FINESTEERING,2209,515774.000,02000020,fc0e,16809;"PwrPak7-NMNE17200009B","P3YSXG8D",2P4GHZ,WPA2,CCMP,US,11,"00:23:a7:b6:de:9c"*aa09a912

Field	Field Type	Description	Format	Binary Bytes	Binary Offset
1	Log header	WIFIAPSETTINGS header For information about log headers, see ASCII, Abbreviated ASCII or Binary.	-	H	0
2	SSID	SSID of the AP	String[Max 33]	Variable	H
3	passkey	Passkey of the AP	String[Max 65]	Variable	Variable
4	band	Wi-Fi operating band. See Table: Wi-Fi Band.	Enum	4	Variable
5	security protocol	Wireless security protocol. See Table: Wi-Fi Security Protocol.	Enum	4	Variable
6	encryption	Wireless encryption type. See Table: Wi-Fi Encryption Type.	Enum	4	Variable
7	region	Regulatory region. See Table: Regulatory Region.	Enum	4	Variable
8	channel	Wireless channel used by access point to communicate with connected clients.	Int	4	Variable
9	BSSID	BSSID of the AP (MAC of the Wi-Fi interface)	String[Max 18]	Variable	Variable
10	xxxx	32-bit CRC (ASCII or Binary only)	Hex	4	Variable
11	[CR][LF]	Sentence terminator (ASCII only)	-	-	-

Wi-Fi Band

Binary	ASCII	Description
1	2P4GHZ	2.4 GHz

Wi-Fi Security Protocol

Binary	ASCII	Description
1	OPEN	Open network (No security)
2	WPA	Wi-Fi Protected Access
3	WPA2	Wi-Fi Protected Access version 2

Wi-Fi Encryption Type

Binary	ASCII	Description
1	OPEN	Open (no encryption)
2	TKIP	Temporal Key Integrity Protocol (used with WPA)
3	CCMP	AES-based CCMP (Cipher Chaining Message Authentication) used with WPA2

NovAtel Wi-Fi access points only support the WPA2 security protocol. As a result, the WIFIAPSETTINGS log will only report CCMP.

Regulatory Region

Binary	ASCII	Description
0	None	Receiver has not been configured to comply with any regional regulatory requirements. Wireless components (e.g. Wi-Fi) will not operate. Contact NovAtel Customer Support.
1	US	United States
2	EU	Europe
3	AU	Australia
4	JP	Japan
5	NZ	New Zealand
6	BR	Brazil