OEM7 Family Receiver Cards Installation

The following sections provide instructions and guidelines for checking the contents of the shipping box and integrating a NovAtel receiver into a GNSS receiver system.

Additional Equipment Required

For the receiver to perform optimally, the following additional equipment is required:

  • Interface for power, communications and other signals

  • Enclosure to protect against the environment

  • GNSS antenna (for a list of NovAtel GNSS antennas refer to our web site novatel.com/products/gps-gnss-antennas)

  • Coaxial cable (and interconnect adapter cable, as necessary)

  • Data communication equipment capable of serial, USB or Ethernet communication

  • Serial, USB or Ethernet data cable

  • Power supply

  • Optional NovAtel OEM7 Development Kit (01019433)
    OEM7 Development Kit Guide (GM-14915145)

When the OEM7 receiver is installed in a permanent location, it should be protected by a lightning protection device according to local building codes (refer to the Lightning Protection).

Emissions
OEM7 receiver products have been designed and tested to meet regulatory emission limits. Emission levels may be higher for OEM7 receiver card level operation than for integrated enclosure level products using an OEM7 receiver card.
Refer to Receiver Card Notices for more information.