OEM7 Development Kit

The OEM7 Development Kit provides a convenient way to access OEM7 input and output signals.

Refer to the OEM7 Development Kit Guide for information about using the OEM7 Development Kit.

For USB connections to the OEM7 Development Kit, use the USB0 port only.
USB0 functions in Device mode and USB1 is not available for use regardless of the type of receiver installed on the OEM7 Development Kit.

The OEM7 Development Kit was updated in June 2019. If you are using an OEM7 Development Kit produced prior to June 2019 (HW Rev 1.00), refer to rev 2 of the OEM7 Development Kit Guide for information (OEM7 Development Kit Guide v2).