Connecting the Antenna to the Receiver Card

An interconnect adapter cable is required to convert the end of the antenna coaxial cable to the RF input connector on the OEM7 receiver.

OEM7 Antenna Connectors

Receiver

Primary Antenna
Connector

Secondary Antenna
Connector

External Oscillator

OEM719

MCX1

N/A

N/A

OEM729

MMCX

N/A

MMCX

OEM7600

MMCX (right angle)

N/A

N/A

OEM7700

MMBX

N/A

N/A

OEM7720

MMBX

MMBX

N/A

For the location of the antenna connector on the receiver card, see Figure: OEM719 Connector and Indicator Locations, Figure: OEM729 Connector and Indicator Locations, Figure: OEM7600 Connector and Indicator Locations, Figure: OEM7700 Connector and Indicator Locations or Figure: OEM7720 Connector and Indicator Locations.

NovAtel generally uses the MMBX connectors with barrels for board-to-board mounting. These connectors allow a blind mate and are able to move slightly under vibration to reduce the potential for damage to either PCB. The mating connector on the interface PCB must be a Huber and Suhner 82_MMBX-S50-0-1/111 NE or similar.

The MMBX antenna connector can also be connected directly to a cable. For information about MMBX to cable solutions, contact Customer Support to obtain to the OEM7 Receiver Card Mechanical Integration Application Note (D19021).

Receiver

Antenna Connector

Barrel for Board to Board Mounting

OEM7700 and
OEM7720

HUBER + SUHNER
MMBX Straight PCB jack
Commercial PN: 82_MMBX-S50-0-1/111 NE

HUBER + SUHNER
MMBX plug (male) / MMBX plug (male)
7 mm (mated) – Commercial PN: 32_MMBX-50-0-30/111_NE
10 mm (mated) – Commercial PN: 32_MMBX-50-0-4/111_NE