WIFIAPPASSKEY

Set Wi-Fi access point passkey

Platform:

PwrPak7, SMART7-I, SMART7-SI, SMART7-W

PwrPak7M and PwrPak7Q variants do not support this command.

Use this command to set the WPA2 PSK ASCII passkey for the Wi-Fi module when the receiver is operating as an Access Point.

The default passkey is printed on the receiver label. The default passkey can be labeled WIFI Password or Password.

The new passkey takes effect the next time the WIFIMODE AP or WIFIMODE CONCURRENT command is received.

The term passkey and password are the same.

Message ID: 2090

Abbreviated ASCII syntax:

WIFIAPPASSKEY passkey

Factory default:

The default passkey/password is printed on the receiver label. The default passkey can be labeled WIFI Password or Password.

Example:

WIFIAPPASSKEY "bysP3zE6SZmFQeyd"

Field	Field type	ASCII value	Binary value	Description	Format	Binary bytes	Binary offset
1	Command header	-	-	WIFIAPPASSKEY header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary.	-	H	0
2	passkey	Null-terminated ASCII string, 8 to 64 characters		WPA2 PSK ASCII passkey The passkey can contain upper case letters, lower case letters, numbers, punctuation and some symbols. Specifically, any character from SPACE (decimal 32, hex 0x20) to TILDE (decimal 126, hex 0x7E) except QUOTE (decimal 34, hex 0x22). If the new passkey does not meet the above criteria, the receiver will output the response New password is unacceptable. If the passkey contains a SPACE (decimal 32, hex 0x20) or COMMA (decimal 44, hex 0x2C), the passkey must be enclosed in QUOTE characters (decimal 34, hex 0x22) when entered in ASCII or Abbreviated ASCII.	String[65]	Variable	H