WIFIAPCHANNEL
Set the channel for the Wi-Fi access point
|
Platform: |
PwrPak7, SMART7-I, SMART7-SI, SMART7-W |
PwrPak7M and PwrPak7Q variants do not support this command.
Use this command to set the operating channel for the Wi-Fi module when operating as an access point. The new channel will be used the next time the WIFIMODE AP or WIFIMODE CONCURRENT command is received.
Message ID: 2091
Abbreviated ASCII Syntax:
WIFIAPCHANNEL channel
Factory Default:
WIFIAPCHANNEL 11
Example:
WIFIAPCHANNEL 6
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Value |
Binary Offset |
|---|---|---|---|---|---|---|---|
|
1 |
Command header |
- |
- |
WIFIAPCHANNEL header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary. |
- |
H |
0 |
|
2 |
channel |
1-14 |
802.11 channel |
Long |
4 |
H |
|
For best performance, choose one of the non-overlapping channels: 1, 6, or 11.