TRACKSIGNAL
Enable or disable tracking of a signal
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
Use this command to enable or disable tracking of a signal within the channel configuration signal list.
Primary signals (LBAND and L1/E1/B1I signals) can not be disabled using the TRACKSIGNAL command.
Channel configurations containing the B2 signal will either track B2I or B2a signals corresponding to the availability of BeiDou Phase II and Phase III satellites respectively. Due to this, using the BEIDOUB2 option will toggle tracking for both B2I and B2a signals.
By default, the receiver attempts to track all signals in the channel configuration without needing a TRACKSIGNAL command. The channel configuration can be determined from the CHANCONFIGLIST log.
Message ID: 2311
Abbreviated ASCII Syntax:
TRACKSIGNAL signal track
Abbreviated ASCII Example:
TRACKSIGNAL GPSL2C DISABLE
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
|---|---|---|---|---|---|---|---|
|
1 |
Command header |
– |
– |
TRACKSIGNAL header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary. |
– |
H |
0 |
|
2 |
signal |
See Table: Signal |
The signal to enable or disable The signal is expected to match a signal in the current channel configuration. |
Enum |
4 |
H |
|
|
3 |
track |
DISABLE |
0 |
Disable tracking of the signal |
Enum |
4 |
H+4 |
|
ENABLE |
1 |
Enable tracking of the signal |
|||||