CHANCONFIGLIST
Channel configuration list
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
This log provides the channel configuration list including the number of channels and signal types. If more than one channel configuration is available, then it can be switched using the SELECTCHANCONFIG command.
Message ID: 1148
Log Type: Polled
Recommended Input:
log chanconfiglist once
Abbreviated ASCII Example:
<CHANCONFIGLIST USB1 0 65.0 FINESTEERING 2209 502508.560 02000020 d1c0 16809
< 3 9
< 7
< 16 GPSL1L2PL5
< 4 QZSSL1CAL2CL5
< 4 SBASL1
< 14 GLOL1L2
< 16 GALE1E5B
< 30 BEIDOUB1B2B2B
< 5 LBAND
< 7
< 16 GPSL1L2
< 4 QZSSL1CAL2C
< 4 SBASL1
< 14 GLOL1L2
< 16 GALE1E5B
< 30 BEIDOUB1B2B
< 5 LBAND
< 7
< 16 GPSL1L2PL2CL5
< 4 QZSSL1CAL2CL5
< 4 SBASL1
< 14 GLOL1L2PL2C
< 16 GALE1E5AE5BALTBOC
< 30 BEIDOUB1B2B2B
< 5 LBAND
< 8
< 16 GPSL1L2PL2CL5
< 4 QZSSL1CAL2CL5
< 4 SBASL1L5
< 14 GLOL1L2PL2C
< 16 GALE1E5AE5BALTBOC
< 20 BEIDOUB1B1CB2B2BB3
< 8 NAVICL5
< 5 LBAND
< 8
< 16 GPSL1L2PL2CL5L1C
< 4 QZSSL1CAL2CL5L1CL6
< 4 SBASL1L5
< 14 GLOL1L2PL2CL3
< 11 GALE1E5AE5BALTBOCE6
< 16 BEIDOUB1B1CB2B2BB3
< 8 NAVICL5
< 5 LBAND
< 8
< 16 GPSL1L2PL2CL5
< 6 QZSSL1CAL2CL5
< 4 SBASL1L5
< 14 GLOL1L2PL2CL3
< 9 GALE1E5AE5BALTBOCE6
< 24 BEIDOUB1B1CB2B2BB3
< 8 NAVICL5
< 5 LBAND
< 8
< 16 GPSL1L2PL2CL5
< 4 QZSSL1CAL2CL5
< 4 SBASL1L5
< 14 GLOL1L2PL2CL3
< 16 GALE1E5AE5BALTBOCE6
< 16 BEIDOUB1B1CB2B2BB3
< 8 NAVICL5
< 5 LBAND
< 8
< 16 GPSL1L2PL2CL5
< 4 QZSSL1CAL2CL5L1CL6
< 4 SBASL1L5
< 14 GLOL1L2PL2CL3
< 11 GALE1E5AE5BALTBOCE6
< 20 BEIDOUB1B1CB2B2BB3
< 8 NAVICL5
< 5 LBAND
< 8
< 16 GPSL1L2PL2CL5L1C
< 4 QZSSL1CAL2CL5L1C
< 4 SBASL1L5
< 14 GLOL1L2PL2CL3
< 16 GALE1E5AE5BALTBOC
< 20 BEIDOUB1B1CB2B2B
< 8 NAVICL5
< 5 LBAND
Field |
Field type |
Description |
Format |
Binary Bytes |
Binary Offset |
1 |
Log header |
CHANCONFIGLIST header For information about log headers, see ASCII, Abbreviated ASCII or Binary. |
|
H |
0 |
2 |
SetInUse |
Current channel configuration being used. For example, if SetInUse is 2 then the second channel configuration listed in this log is the current channel configuration |
Ulong |
4 |
H |
3 |
#chanconfigs |
Number of channel configurations to follow |
Ulong |
4 |
H+4 |
4 |
#signaltypes |
Total number of signal types in this channel configuration |
Ulong |
4 |
H+8 |
5 |
NumChans |
Number of channels for individual signal type |
Ulong |
4 |
H+12 |
6 |
SignalType |
Ulong |
4 |
H+16 |
|
7 |
Next chanconfig offset = H + 8+ (#chanconfigs * (4 + (#signaltypes * 8))) |
||||
8 |
xxxx |
32-bit CRC (ASCII and Binary only) |
Hex |
4 |
variable |
9 |
[CR][LF] |
Sentence terminator (ASCII only) |
- |
- |
- |
Configurations with B2I will track the B2I signal provided by BeiDou Phase II satellites. Configurations with B2 will track either the B2I or B2a signal corresponding to BeiDou Phase II and Phase III satellites respectively, if the frequency is enabled by the model.