RESET
Performs a hardware reset
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
This command performs a hardware reset. The receiver configuration reverts either to the factory default, if no user configuration was saved or the last SAVECONFIG settings. Refer to the FRESET command and SAVECONFIG command.
The optional delay field is used to set the number of seconds the receiver is to wait before resetting.
Message ID: 18
Abbreviated ASCII Syntax:
RESET [delay]
Input Example
RESET 30
The RESET command can be used to erase any unsaved changes to the receiver configuration.
Unlike the FRESET command, the RESET command does not erase data stored in the NVM, such as Almanac and Ephemeris data.
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
|
1 |
Command header |
- |
- |
RESET header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary. |
- |
H |
0 |
|
2 |
delay (0-60) |
|
|
Seconds to wait before resetting (default = 0) |
Ulong |
4 |
H |