DGPSTXID
Sets DGPS station ID
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
This command is used to set the station ID value for the receiver when it is transmitting corrections. This allows for the easy identification of which base station was the source of the data.
For example, if you want to compare RTCM and RTCMV3 corrections, you would be easily able to identify their base stations by first setting their respective DGPSTXID values.
If DGPSTXID AUTO is sent, the Base Station ID String (field 3) is mandatory, but any ID entered is always replaced by ANY.
Message ID: 144
Abbreviated ASCII Syntax:
DGPSTXID type ID
Factory Default:
DGPSTXID auto ANY
ASCII Examples:
DGPSTXID RTCM 2 - using an RTCM type and ID
DGPSTXID CMR 30 - using a CMR type and ID
DGPSTXID CMR ANY - using the default CMR ID
DGPSTXID RTCA d36d - using an RTCA type and ID
DGPSTXID RTCMV3 2050 - using an RTCMV3 type and ID
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
|---|---|---|---|---|---|---|---|
|
1 |
Command header |
- |
- |
DGPSTXID header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary. |
- |
H |
0 |
|
2 |
type |
RTCM |
0 |
Enum |
4 |
H |
|
|
RTCA |
1 |
||||||
|
CMR |
2 |
||||||
|
AUTO |
10 |
||||||
|
RTCMV3 |
13 |
||||||
|
NOVATELX |
14 |
||||||
|
3 |
ID |
Char[5] |
Base Station ID String or ANY |
Char[5] |
8 |
H+4 |
|