OEM719 Mechanical Specifications

• Figure: OEM719 Dimensions

• Figure: OEM719 Keep-outs

• Figure: OEM719A Dimensions

• Figure: OEM719A Keep-outs

• Figure: OEM719B Dimensions

• Figure: OEM719B Keep-outs

• Figure: OEM719 Mounting Surface

In the following diagrams, the dimensions are in millimetres [inches].

The mounting surfaces are shown in gray. These mounting surfaces apply to all variants of the OEM719.

These mounting surfaces are designed to work with mounting rails. For information about mounting the OEM719, refer to Mounting the Printed Circuit Board.

Assembly tolerances must be considered when using mounting rail features.

For information about the recommended mating connector, refer to Table: OEM7 Communication and I/O Connectors.