Optional Side Mounting Holes

There are mounting and alignment holes on both sides of the IMU enclosure to allow the IMU to be mounted on its side. These holes have the same pattern and spacing as the mounting and alignment holes on the bottom of the IMU enclosure.

To access these holes, the NovAtel label must be removed from the side of the enclosure. A small notch on the side of enclosure allows you to insert a small flat blade screw under the label to start lifting the label.

Optional Side Mounting Holes


OM-20000167 v12

July 2019

Email comments to NovAtel_TPUBS@NovAtel.com

7.07.01 / OM7MR0701RN0000
PP7 07.07.00 / EP7PR0700RN0000
7.06.02 / OA7CR0602RN0000