Power Cycle the Radio Module

The radio settings are saved on the radio module. If the radio module is malfunctioning, a power cycle may recover the unit. A power cycle is suggested as a first step in radio recovery since it does not require the radio to be re-programmed.

1. Start the SATELSTATUS log to monitor the radio status.

   LOG SATELSTATUS ONCHANGED

2. Use the SATELCONTROL command to turn the radio off.

   SATELCONTROL POWER OFF

3. Wait for the state in the SATELSTATUS log to change to OFF.

   <SATELSTATUS COM1 0 79.0 FINESTEERING 2009 317298.899 02000000 aaba 32768

   <     OFF NONE ""

4. Use the SATELCONTROL command to turn the radio on.

   SATELCONTROL POWER ON

5. Wait for the state in the SATELSTATUS log to change to UNDETECTED.

   <SATELSTATUS COM1 0 78.5 FINESTEERING 2009 317415.130 02000000 aaba 32768

   <     UNDETECTED NONE ""

6. Use the SATELDETECT command to detect the radio.

   SATELDETECT COM3

7. Wait for the state in the SATELSTATUS log to change to READY.

   <SATELSTATUS COM1 0 74.5 FINESTEERING 2009 317462.889 02000000 aaba 32768

   <     DETECTING NONE ""

    

   <SATELSTATUS COM1 0 79.0 FINESTEERING 2009 317466.901 02000000 aaba 32768

   <     READY NONE ""