Factory Reset the Radio Module

If the radio cannot be recovered by a power cycle, it is possible to restore the radio to its factory settings. Note that the radio will need to be re-programmed to match the settings of the base station.

1. Start the SATELSTATUS log to monitor the radio status.

   LOG SATELSTATUS ONCHANGED

2. Use the SATELCONTROL command to factory reset the radio.

   SATELCONTROL FRESET

3. Wait for the state in the SATELSTATUS log to change to BUSY and then READY.

   <SATELSTATUS COM1 0 73.0 FINESTEERING 2009 317587.963 02000000 aaba 32768

   <     BUSY NONE ""

    

   <SATELSTATUS COM1 0 80.0 FINESTEERING 2009 317598.053 02000000 aaba 32768

   <     READY NONE ""

4. Configure the radio to match the settings of the base station. See Configure the RELAY7 Radio.