Connect I/O Signals to the PwrPak7

The PwrPak7 has several inputs and outputs, also referred to as strobes, that provide status and synchronization signals.

• Event Inputs

• Event Outputs

• Pulse Per Second (PPS) output

• Wheel Sensor inputs

For more information about the I/O signals, refer to the PwrPak7 Strobe Specifications.

To access the I/O signals, connect the PwrPak7 All I/O SPAN Cable (PN: 01020004), or a custom made cable, to the HD26 COM PORTS connector.

For information about the PwrPak7 All I/O SPAN Cable, see PwrPak7 All I/O SPAN Cable. This section also has the connector pin out and connector recommendations for making a custom cable.

The PwrPak7 All I/O Extension Cable (01020005) is an accessory for the 0102004 that connects to the DB15 connector on the 01020004 and provides individual wires for each I/O signal.