Terminal

Use the Terminal window to send commands to the receiver and display any receiver acknowledgments and outputs.

To enter a command:

1. Enter the command and click RETURN.

For information about the commands available and commands parameters, refer to the OEM7 Receiver User Documentation Portal (docs.novatel.com/OEM7).

The Terminal window does not support changing the Admin or Wi-Fi Hotspot password to a password that contains spaces. If you want to change the Admin or Wi-Fi Hotspot password to a password that contains spaces, use the CLI interface available on any receiver COM port.

To re-issue a command:

1. Use the Up and Down arrow keys on the keyboard to select the command to re-issue.

2. Press ENTER.

Two buttons are also available on the Terminal window.

Load

Click Load to load a list of commands from a file to the receiver and automatically execute those commands.

A semicolon (;) can be used to comment out a line in the file being loaded. When a semicolon is added to the start of a line, the command in that line will not be run by the receiver and the receiver will not generate an error message.

Save

Click Save to save the commands issued and responses received in the current session of the Terminal to a file.