Satellite Tracking Tile

The Satellite Tracking tile displays the carrier to noise ratio and lock time for the GNSS signals the receiver is tracking. This tile is on the Tracking page of the Status window.

Constellation

The graphs on the Satellite Tracking tile display tracking information from the satellites of a single constellation (e.g. GPS). The button of the constellation currently being viewed is dark. To change the constellation being viewed, click the button for the constellation.

Graphs

There are two graphs available on the Satellite Tracking tile: Carrier-to-Noise and Lock Time.

Carrier-to-Noise

To view the Carrier-to-Noise graph, click the Carrier-to-noise button.

The Carrier-to-Noise graph displays the current carrier-to-noise ratio values for all of the satellites (PRNs) being tracked for the currently selected constellation. A carrier-to-noise bar is shown for each of the frequencies available on the PRN. If there are no frequencies being tracked for the PRN, the text "no signal" is shown for the PRN. If there are more PRNs tracked than can be shown on the tile, a scroll bar appears at the bottom of the graph.

The status of the signal is indicated by the color of the carrier-to-noise bar.

Green

Good

Amber

Warning

Red

Poor

A legend for the carrier-to-noise status is shown on the right side of the graph. To hide or show the legend, click the arrow button on the legend.

Lock Time

To view the Lock Time graph, click the Lock Time button.

The Lock Time graph displays the number of seconds of continuous tracking for all of the satellites (PRNs) being tracked for the currently selected constellation. A lock time bar is shown for each of the frequencies available on the PRN. If there are no frequencies being tracked for the PRN, the text "no signal" is shown for the PRN. If there are more PRNs tracked than can be shown on the tile, a scroll bar appears at the bottom of the graph.

A legend for the lock time status is shown on the right side of the graph. To hide or show the legend, click the arrow button on the legend.

View Satellite Details

To view details about a specific satellite, hover the mouse pointer over one of the signals bars. A pop up window appears showing information for the frequencies tracked on that satellite. The signal the mouse pointer is over is highlighted.

The details pop up window is available on the Carrier-to-Noise graph and the Lock Time graph.

Show

Elevation Mask

When the Elevation Mask option is enabled, satellites below the configured elevation mask for the constellation have a gray bar at the top of the graph. The gray bar has the text "Below X Mask" where X is the elevation mask for the constellation.

When the Elevation Mask option is disabled, the gray bar is not shown.

Highest/Lowest Values

When the Highest/Lowest Values option is enabled, marks are added to each signal bar to indicate the highest and lowest Carrier to Noise values recorded in the last 30 seconds.

When the Highest/Lowest Values option is disabled, the highest and lowest marks are hidden.

The Highest/Lowest Values option is available only on the Carrier to Noise graph.

Sort By

The information on the Satellite Tracking graphs can be sort by PRN or satellite elevation.

PRN

Select this option to sort the graph by satellite PRN number in ascending order.

Elevation 0°>90°

Select this option to sort the graph by elevation angle starting with 0° (horizon).

Elevation 90°>0°

Select this option to sort the graph by elevation angle starting with 90° (directly overhead).

View all satellite information

To view the satellite tracking information for all of the satellites in a constellation:

  1. Click the button for the constellation to view (e.g. GPS).

  2. Click the View all satellite information link.

    The All satellite information dialog box appears.

    This dialog box shows the PRN, Elevation, Channel, Frequencies available, Carrier-to-Noise ratio and Lock Time for each satellite tracked from the selected constellation. It also shows the Elevation Mask set for the constellation.

  3. To copy the satellite information to another application, click the Copy to clipboard link. The information can then be pasted into any application that can accept CSV formatted information.

  4. When finished viewing the information, click the Done button to close the dialog box.

Satellite Tracking Status Indicator

Indicator Color

Status

Red

With a proper fix position:

Clock model is not computed (receiver is not tracking enough satellites).

 

Without proper fix position or an invalid fix position:

A FIX POSITION is not entered in CONFIGURATION state and/or the clock model is not computed (receiver is not tracking enough satellites).

Green

At least four PRNs have a status of green.