Configuration View

If the G-III Reference Receiver state is Configuration and the NovAtel Application Suite computer is connected to the Data port, the Configuration Mode view is the default view.

If the NovAtel Application Suite computer is connected to the Maintenance port, the Configuration Mode view is the default view irrespective of whether the receiver state is Operational or Configuration.

When connected to the Maintenance port, only the Receiver Version information on the Device window is available. All other data is shown as “NA”.

The Terminal window is the default window in Configuration View. From this window you can send commands to the G-III Reference Receiver and display any receiver acknowledgements and outputs.

Also available in Configuration View are the