Examining the AUX1 Status Word
Table: Resolving an Error in the AUX1 Status Word provides actions to take when your receiver has an error flag in the AUX1 status word.
Bit Set |
Action to Resolve |
0-2 |
Jammer detected |
3 |
None. This bit indicates that Position Averaging is ON |
4-6 |
Jammer detected |
7 |
|
8-10 |
|
11 |
(Reserved bit) |
12 |
None. This bit indicates a Profile set using the PROFILE command is activated. |
13 |
Throttled Ethernet Reception Check for unusually high Ethernet traffic being directed to the Receiver. This does not represent an error condition on the receiver, but suggests there may be an issue in the network environment on the receiver. |
14-17 |
AGC error on RF1 through RF4 respectively. |
18 |
Connect the receiver via Ethernet. See Ethernet Ports (Receiver Card), Ethernet Port (PwrPak7), Ethernet Port (CPT7) or Ethernet Port (SMART7) |
19-21 |
Reduce the amount of logging on the Ethernet ports |
22-24 |
Reduce the amount of logging on the NTRIP ports |
25-27 |
Reduce the amount of logging on the Virtual COM ports |
28-29 |
AGC error on RF5 (bit 28) or RF6 (bit 29). |
30-31 |
(Reserved bits) |
RF Path |
OEM719, OEM729, |
OEM7720, PwrPak7D, |
OEM7500, OEM7600, |
---|---|---|---|
RF1 |
GPS L1 GLONASS L1 Galileo E1 BDS B1 QZSS L1 SBAS L1 |
1st antenna GPS L1 GLONASS L1 Galileo E1 BDS B1 QZSS L1 SBAS L1 |
GPS L1 GLONASS L1 Galileo E1 BDS B1 QZSS L1 SBAS L1 |
RF2 |
Reserved |
Reserved |
GPS L2/L5 GLONASS L2/L3 Galileo E5 BDS B2 QZSS L2/L5 NavIC L5 SBAS L5 |
RF3 |
GPS L2 GLONASS L2 Galileo E6 BDS B3 QZSS L2/L6
|
1st antenna GPS L2/L5 GLONASS L2/L3 Galileo E5 BDS B2 QZSS L2/L5 NavIC L5 SBAS L5 |
Reserved |
RF4 |
GPS L5 GLONASS L3 Galileo E5 BDS B2 QZSS L5 NavIC L5 SBAS L5 |
2nd antenna GPS L1 GLONASS L1 Galileo E1 BDS B1 QZSS L1
|
Reserved |
RF5 |
Reserved |
2nd antenna GPS L2/L5 GLONASS L2/L3 Galileo E5 BDS B2 QZSS L2/L5 NavIC L5 |
Reserved |
RF6 |
Reserved |
Reserved |
Reserved |