CPT7 strobe specifications

Input marks for which a pulse greater than 150 ns triggers certain logs to be generated. (Refer to the MARKPOS, MARK2POS, MARK3POS, MARK1TIME, MARK2TIME and MARK3TIME logs and ONMARK trigger.) Polarity is configurable using the EVENTINCONTROL command.

Programmable variable frequency outputs ranging from 0 Hz to 10 MHz (refer to the EVENTOUTCONTROL command).

Minimum pulse period for the CPT7 EVENT_OUT lines is 50 ns.

If your application requires a higher frequency defined pulse (i.e. always 20 MHz at 50% duty cycle), the waveform can be regenerated external to the CPT7 by using a Schmitt trigger or buffer with appropriate limits set on the output line.

<±1 mA

±6 mA