IMU-P1750 cable
The NovAtel part number for the IMU-P1750 cable is 01019211. This cable provides power to the IMU from an external power source and enables communication between the receiver and the IMU.
In the following diagram, the dimensions are in millimetres.
IMU-P1750 cable
|
J1 (15 pin Micro D female) |
P2 (female DB9) |
P3 |
||
|
Pin # |
Signal name |
Pin # |
Signal name |
Labels |
|
1 |
TX+ |
2 |
RX+ |
|
|
2 |
TX- |
8 |
RX- |
|
|
3 |
RX- |
7 |
TX- |
|
|
4 |
RX+ |
3 |
TX+ |
|
|
5 |
Reserved |
|
|
|
|
6 |
Reserved |
|
|
|
|
7 |
Reserved |
|
|
|
|
8 |
Reserved |
|
|
|
|
9 |
Power Return |
|
|
PWR- |
|
10 |
VDC Power |
|
|
PWR+ |
|
11 |
MSync |
1 |
IMU Event Out (Sync) |
|
|
12 |
TOV-Out |
9 |
Event In |
|
|
13 |
Reserved |
|
|
|
|
14 |
Reserved |
|
|
|
|
15 |
Signal Ground |
5 |
Signal Ground |
|
|
Shell |
Chassis Ground |
Shell |
Chassis Ground |
|
Custom cable recommendations
The tables below provide recommendations for creating custom cables to replace the IMU-P1750 cable (01019211).
|
Connector |
Description |
|---|---|
|
J1 |
Micro-D, 15-pin, female |
|
J2 |
DB-9, female |
|
IMU |
RS-422 |
|---|---|
|
IMU-P1750 |
< 1.5 metres |