SMART2 LED
The SMART2 has a single LED to indicate status.
SMART2 Status LED
|
Label |
Description |
Model |
|---|---|---|
|
|
Status (Power/GNSS) |
All hardware options |
|
State |
Description |
|---|---|
|
Green Solid |
Precise solution good (PPP, Fixed or PPP+INS) |
|
Green Slow Flash (1 Hz) |
Precise solution converging |
|
Yellow Solid |
Basic solution (Single Point/SBAS/DGPS) |
|
Yellow Slow Flash (1 Hz) |
Tracking satellites and calculating initial position solution |
|
Yellow Fast Flash (3 Hz) |
Initialized and ready for communication |
|
Red Solid (Initial) |
Power On/Reset (for about 10 seconds after power-on or reset) |
|
Red Solid (Continuous) |
Receiver system error, if indicator persists after 30 seconds |
|
Red Slow Flash (1 Hz) |
Position quality warning (unreliable/high error) |
|
Red Fast Flash (3 Hz) |
Position unavailable (unusable) |