Wi-Fi communications

Wi-Fi capable receivers are configured to run a 2.4 GHz 802.11 Access Point (AP) by default. The AP starts automatically when the receiver is powered on; no explicit configuration is required.

Establish a connection between the receiver and a Wi-Fi network by locating the receiver in the list of detected Wi-Fi devices. Once detected, it is easy to connect to any laptop, tablet or smartphone with Wi-Fi capability and a web browser.

Refer to the Wi-Fi section in Connect the SMART7 to data communication equipment for instructions on starting a Wi-Fi connection to the SMART7-I or SMART7-W.

Refer to the Wi-Fi section in Connect the PwrPak7 to data communication equipment for instructions on starting a Wi-Fi connection to the PwrPak7.

To change the configuration of the Wi-Fi interface, including password, refer to Wi-Fi configuration.

OEM7(s) are intended to be integrated into a larger system or used within a laboratory environment. The system integrator is responsible for providing secure network and physical access to the OEM7 card(s).

PwrPak7M and PwrPak7Q variants do not support Wi-Fi communications.