ITBANDPASSBANK
Allowable band pass filter configurations
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
The ITBANDPASSBANK log provides information on the allowable configurations for each frequency when applying a bandpass filter. The current filters in use can be seen with the ITFILTTABLE log.
To view the allowable configurations for the secondary antenna of dual antenna receivers (OEM7720, PwrPak7D, PwrPak7D-E1, PwrPak7D-E2 and CPT7), log ITBANDPASSBANK_1.
Message ID: 2022
Log Type: Asynch
Recommended Input:
log itbandpassbanka once
Abbreviated ASCII Example:
<ITBANDPASSBANK USB1 0 87.5 FINESTEERING 1933 346809.694 12000020 fb2e 14137
5
GPSL5 1164.3750 1173.1250 1178.1250 1186.8750 0.05
GALILEOE5B 1195.6250 1204.3750 1209.3750 1218.1250 0.05
BEIDOUB1 1551.2500 1560.0000 1565.0000 1573.7500 0.05
BEIDOUB2 1195.6250 1204.3750 1209.3750 1218.1250 0.05
QZSSL5 1164.3750 1173.1250 1178.1250 1186.8750 0.05
|
Field |
Field Type |
Description |
Format |
Binary Bytes |
Binary Offset |
|---|---|---|---|---|---|
|
1 |
ITBANDPASSBANK header |
Log header. For information about the log headers, see ASCII, Abbreviated ASCII or Binary. |
- |
H |
0 |
|
2 |
# of entries |
Number of entries to follow |
Ulong |
4 |
H |
|
3 |
frequency |
Enum |
4 |
H+4 |
|
|
4 |
min lower frequency cutoff |
The minimum frequency cutoff at the lower end (MHz) |
Float |
4 |
H+8 |
|
5 |
max lower frequency cutoff |
The maximum frequency cutoff at the lower end (MHz) |
Float |
4 |
H+12 |
|
6 |
min upper frequency cutoff |
The minimum frequency cutoff at the upper end (MHz) |
Float |
4 |
H+16 |
|
7 |
max upper frequency cutoff |
The maximum frequency cutoff at the upper end (MHz) |
Float |
4 |
H+20 |
|
8 |
frequency step |
The minimum cut off frequency resolution (MHz) |
Float |
4 |
H+24 |
|
9 |
Next entry offset = H + 4 + (#entries * 24) |
||||
|
10 |
xxxx |
32-bit CRC (ASCII and Binary only) |
Ulong |
4 |
H+4+ |
|
11 |
[CR][LF] |
Sentence terminator (ASCII only) |
- |
- |
- |