HG1700 IMU in SPAN HG Enclosure
The following procedure provides the necessary information to install the HG1700 sensor into the SPAN HG Enclosure (NovAtel part number 01017898). The steps required for this procedure are:
-
Disassemble the SPAN HG Enclosure
-
Install the HG1700 Sensor Unit
-
Make Electrical Connections
-
Reassemble the SPAN HG Enclosure
Ensure you use a ground strap before installing the internal circuit boards. Do NOT scratch any surfaces of the unit.
Required Parts
Reference |
Description |
1 |
SPAN IMU Enclosure |
2 |
HG1700 Flex Cable |
3 |
HG1700 Sensor Unit |