TRACKSV

Overrides automatic satellite assignment criteria

Platform:

OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2

This command is used to override the automatic satellite/channel assignment for all satellites with manual instructions.

Message ID: 1326

Abbreviated ASCII syntax:

TRACKSV system SVID condition

Factory default:

GPS, GLONASS, GALILEO, QZSS, BeiDou and NavIC default = GOODHEALTH
SBAS default = ANYHEALTH

TRACKSV QZSS 198 NEVER

TRACKSV QZSS 202 NEVER

QZSS 198 and QZSS 202 are excluded because they are defined as test PRNs in the QZSS ICD.

Input example:

TRACKSV GALILEO 0 ANYHEALTH

For dual antenna receivers, this command applies to both the primary and secondary antennas.

Field	Field type	ASCII value	Binary value	Description	Format	Binary bytes	Binary offset
1	Command header	-	-	TRACKSV header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary.	-	H	0
2	System	See Table: Satellite system		System that the SVID belongs to	Enum	4	H
3	SVID	Refer to PRN numbers		Satellite SVID number "0" is allowed and applies to all SVIDs for the specified system type	Ulong	4	H+4
4	Condition	See Table: TRACKSV command condition		Tracking condition	Enum	4	H+8

TRACKSV command condition

Binary	ASCII	Description
1	NEVER	Never track this satellite
2	GOODHEALTH	Track this satellite if the health is indicated as healthy in both the almanac and ephemeris
3	ANYHEALTH	Track this satellite regardless of health status
4	ALWAYS	Always track this satellite