SOFTLOADCOMMIT
Completes the SoftLoad process
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
This command completes the SoftLoad process by verifying the downloaded image and activating it. Refer to Updating Using SoftLoad Commands for more information about the SoftLoad process.
This command can only be sent to the receiver when the SOFTLOADSTATUS log reports READY_FOR_DATA.
After issuing the SOFTLOADCOMMIT command the user must wait for the OK or ERROR command response before proceeding. This response is guaranteed to be output from the receiver within 300 seconds from the time the command was received by the receiver. If an error response is returned, consult the SOFTLOADSTATUS log for more detail.
Message ID: 475
Abbreviated ASCII Syntax:
SOFTLOADCOMMIT
Input Example:
SOFTLOADCOMMIT
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
1 |
Command header |
- |
- |
SOFTLOADCOMMIT header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary. |
- |
H |
0 |
2 |
Reserved |
- |
|
Reserved. Set to 1 in the binary case |
Enum |
4 |
H |