RTKSOURCETIMEOUT
Sets RTK correction source timeout
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7 |
When multiple RTK correction sources are available, this command allows the user to set a time, in seconds, that the receiver will wait before switching to another RTK correction source if corrections from the original source are lost.
Message ID: 1445
Abbreviated ASCII Syntax:
RTKSOURCETIMEOUT option [timeout]
Factory Default:
RTKSOURCETIMEOUT AUTO
ASCII Example:
RTKSOURCETIMEOUT auto
RTKSOURCETIMEOUT set 180
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
|---|---|---|---|---|---|---|---|
|
1 |
Command header |
- |
- |
RTKSOURCETIMEOUT header This field contains the command name for abbreviated ASCII or the message header for ASCII (see page 1) or Binary (see page 1). |
- |
H |
0 |
|
2 |
option |
AUTO |
1 |
Sets the timeout according to network type or other self-detected conditions. Timeout field is optional for AUTO and has no effect |
Enum |
4 |
H |
|
SET |
2 |
Sets the timeout to the value entered in the timeout field. |
|||||
|
3 |
timeout |
1 to 3600 s (maximum) |
Specify the time 0 is not accepted if SET is entered in the option field (default=0 for the AUTO option) |
Ulong |
4 |
H+4 |
|