RTKIONORESILIENCE

Sets the RTK ionospheric optimization mode

Platform:

OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7

Only advanced users should use this command.

This command is used to enable RTK optimizations and tuning specific to a mode of ionosphere that presents challenges to which the RTK solution needs to adapt.

This command is available only on OEM 7.09.05 firmware.

Message ID: 2568

Abbreviated ASCII Syntax:

RTKIONORESILIENCE mode

Factory Default:

RTKIONORESILIENCE NORMAL

Field	Field type	ASCII value	Binary value	Description	Format	Binary bytes	Binary offset
1	Command header	–	–	RTKIONORESILIENCE header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary.	–	H	0
2	Mode	NORMAL	0	Enables normal RTK ionosphere resilience.	Enum	4	H
SCINTILLATION	1	Enables RTK ionosphere resilience for environments with scintillation. SCINTILLATION mode is used when the receiver is providing an RTK solution in an environment with an elevated level of ionosphere where scintillation is occurring.

Field

Field type

ASCII value

Binary value

Description

Format

Binary bytes

Binary offset

Command header

–

RTKIONORESILIENCE header

This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary.

–

Mode

NORMAL

Enables normal RTK ionosphere resilience.

Enum

SCINTILLATION

Enables RTK ionosphere resilience for environments with scintillation.

SCINTILLATION mode is used when the receiver is providing an RTK solution in an environment with an elevated level of ionosphere where scintillation is occurring.