PTPPROFILE

Select a PTP configuration profile

Platform:

OEM729, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7-I, SMART7-SI

Use this command to select one of the pre-configured PTP profiles.

Message ID: 2461

Abbreviated ASCII syntax:

PTPPROFILE <ptp_profile>

Factory default:

PTPPROFILE PTP_UDP

ASCII example:

PTPPROFILE PTP_ETH_PEER

Field	Field type	ASCII value	Binary value	Description	Format	Binary bytes	Binary offset
1	Command header	–	–	PTPPROFILE header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary.	–	H	0
2	ptp_profile	Refer to Table: PTP profiles		PTP profile to use	Enum	4	H

PTP profiles

Binary	ASCII	Description
0	PTP_UDP	PTP Default: Multicast, UDP, E2E_DELAY_REQUEST, 1 Hz Sync, 1/2 Hz Announce, Default BMCA, Domain 0, Priority1 128, Priority2 128
1	PTP_UDP_PEER	PTP Default: Multicast, UDP, P2P_DELAY_REQUEST, 1 Hz Sync, 1/2 Hz Announce, Default BMCA, Domain 0, Priority1 128, Priority2 128
2	PTP_ETH	PTP Default: Multicast, Ethernet, E2E_DELAY_REQUEST, 1 Hz Sync, 1/2 Hz Announce, Default BMCA, Domain 0, Priority1 128, Priority2 128
3	PTP_ETH_PEER	PTP Default: Multicast, Ethernet, P2P_DELAY_REQUEST, 1 Hz Sync, 1/2 Hz Announce, Default BMCA, Domain 0, Priority1 128, Priority2 128
6	ITUT_G.8275.1_ETH	ITU-T: Multicast, Ethernet, E2E_DELAY_REQUEST, 16 Hz Sync, 8 Hz Announce, ITUT_G.8275_BMCA, Domain 24, Priority1 128, Priority2 128 This is a Telecom Grandmaster (T_GM) configuration