PSRDIFFTIMEOUT
Sets maximum age of pseudorange differential data
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
This command is used to set the maximum age of pseudorange differential correction data to use when operating as a rover station. Received pseudorange differential correction data, older than the specified time, is ignored. This time out period also applies to differential corrections generated from RTK corrections.
The RTCA Standard for scat-i stipulates that the maximum age of differential correction messages cannot be greater than 22 seconds. Therefore, for RTCA rover users, the recommended PSRDIFF delay setting is 22.
Message ID: 1450
Abbreviated ASCII Syntax:
PSRDIFFTIMEOUT delay
Factory Default:
PSRDIFFTIMEOUT 300
ASCII Example:
PSRDIFFTIMEOUT 60
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
|
1 |
Command header |
- |
- |
PRSDIFFTIMEOUT header This field contains the command name for abbreviated ASCII or the message header for ASCII (see page 1) or Binary (see page 1). |
- |
H |
0 |
|
2 |
delay |
2 to 1000 s |
Maximum pseudorange differential age |
Ulong |
4 |
H |
|