PDPMODE
Selects the PDP mode and dynamics
|
Platform: |
OEM719, OEM729, OEM7500, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7, SMART2 |
This command is used to select the mode and dynamics of the PDP filter.
The PDPFILTER ENABLE command (see the PDPFILTER command) must be entered before the PDPMODE command.
It is recommended that the ionotype be left at AUTO when using either normal mode PDP or GLIDE. See also the SETIONOTYPE command.
Message ID: 970
Abbreviated ASCII Syntax:
PDPMODE mode dynamics
Factory Default:
PDPMODE normal auto
ASCII Example:
PDPMODE relative dynamic
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
|
1 |
Command header |
- |
- |
PDPMODE header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary. |
- |
H |
0 |
|
2 |
mode |
NORMAL |
0 |
In RELATIVE or GLIDE mode, GLIDE performance is optimized to obtain a consistent error in latitude and longitude over time periods of 15 minutes or less, rather than to obtain the smallest absolute position error. See also GLIDE Position Filter for GLIDE mode additional information. GLIDE mode is the same as RELATIVE mode. |
Enum |
4 |
H |
|
RELATIVE |
1 |
||||||
|
GLIDE |
3 |
||||||
|
3 |
dynamics |
AUTO |
0 |
Auto detect dynamics mode |
Enum |
4 |
H+4 |
|
STATIC |
1 |
Static mode |
|||||
|
DYNAMIC |
2 |
Dynamic mode |