MEDIAFORMAT
Format the media for PwrPak7
|
Platform: |
PwrPak7, CPT7, CPT7700 |
PwrPak7M variants do not support this command.
Formats the specified media as FAT32, using enclosure specific cluster size and other parameters.
Only the internal flash memory can be formatted.
Entering this command results in complete loss of all data stored on the media.
Entering this command initiates the format operation. An error is reported if formatting could not be initiated, for example due to the media being disconnected.
Formatting progress can be observed using the FILESYSTEMSTATUS log, which will report BUSY, followed by MOUNTED.
The receiver may reboot in the process.
Message ID: 2128
Abbreviated ASCII Syntax:
MEDIAFORMAT MassStorage
Example:
MEDIAFORMAT INTERNAL_FLASH
|
Field |
Field Type |
ASCII Value |
Binary Value |
Description |
Format |
Binary Bytes |
Binary Offset |
|---|---|---|---|---|---|---|---|
|
1 |
Command header |
- |
- |
MEDIAFORMAT header This field contains the command name for abbreviated ASCII or the message header for ASCII (see page 1) or Binary (see page 1). |
- |
H |
0 |
|
2 |
MassStorage |
INTERNAL_FLASH |
4 |
Format the internal memory in the enclosure. |
Enum |
4 |
H |