IPSERVICE

Configure availability of networks ports/services

Platform:

OEM729, OEM7600, OEM7700, OEM7720, PwrPak7, CPT7, CPT7700, SMART7-I, SMART7-SI

Use the IPSERVICE command to configure the availability of specific network ports/services. When disabled, the service does not accept incoming connections.

On most OEM7 receivers, the FTP Server is disabled by default. The exception is the PwrPak7 which has FTP enabled by default.

We have found two problems in the Microsoft^® FTP clients contained within the Internet Explorer^® and Edge browsers which make them unsuitable for retrieving files from a NovAtel receiver. When using a Windows^® computer to transfer files off a NovAtel receiver, we suggest using a 3rd party FTP client.

Message ID: 1575

Abbreviated ASCII Syntax:

IPSERVICE IPService switch

Factory Default:

IPSERVICE WEB_SERVER DISABLE (OEM719 and OEM7500)

IPSERVICE WEB_SERVER ENABLE (OEM729, OEM7600 OEM7700 and OEM7720)

IPSERVICE SECURE_ICOM DISABLE

ASCII Example:

IPSERVICE FTP_SERVER ENABLE

Field	Field Type	ASCII Value	Binary Value	Description	Format	Binary Bytes	Binary Offset
1	Command header	-	-	IPSERVICE header This field contains the command name for abbreviated ASCII or the message header for ASCII or Binary.	-	H	0
2	ipservice	See Table: IP Services		IP service	Enum	4	H
3	switch	DISABLE	0	Disable the IP service specified.	Enum	4	H+4
3	switch	ENABLE	1	Enable the IP service specified.	Enum	4	H+4

IP Services
Value (Binary)	IP Service (ASCII)	Description
0	NO_PORT	No port
1	FTP_SERVER	FTP server port. For most OEM7 receivers the default = DISABLE. For the PwrPak7 the default = ENABLE. A username and password is required to access the FTP server. The default username is admin. The default password for receiver cards is the receiver PSN. The default password for the PwrPak7 or CPT7 is the enclosure PSN. To change the default password, see the SETADMINPASSWORD command.
2	WEB_SERVER	Web server port For most OEM7 receivers the default = ENABLE. For the OEM7500 and OEM719 the default = DISABLE.
3	SECURE_ICOM	Enables or disables security on ICOM ports. When security is enabled, a login is required as part of the connection process (see the LOGIN command). Default = DISABLE Security in this sense means users must supply a name and password before being allowed to enter commands on the ICOM ports. It does not mean there is data encryption
4	SOFTLOADFILE	Enables or disables SOFTLOADFILE. By default the receiver will not allow the SOFTLOADFILE command to operate until it is enabled using the IPSERVICE command.