FILEMEDIACONFIG

Specify the file media

Platform:

PwrPak7, CPT7, CPT7700

PwrPak7M variants do not support this command.

Use this command to specify which storage media is used for File operations.

To determine what storage device is currently being used for File operations, log this command. For example:

LOG FILEMEDIACONFIG

On OEM7 receiver cards, the file media is always USBSTICK, which is the only media available.
On PwrPak7, CPT7 and CPT7700 products, the active file media is configured using the FILEMEDIACONFIG command.

Message ID: 2117

Abbreviated ASCII Syntax:

FILEMEDIACONFIG MassStorage

ASCII Example:

FILEMEDIACONFIG INTERNAL_FLASH    – Use internal flash as the media

FILEMEDIACONFIG USBSTICK          – Use a USB stick as the media

Field	Field Type	ASCII Value	Binary Value	Description	Format	Binary Bytes	Binary Offset
1	Command header	-	-	FILEMEDIACONFIG header This field contains the command name for abbreviated ASCII or the message header for ASCII (see page 1) or Binary (see page 1).	-	H	0
2	MassStorage	0	DEFAULT_NO_STORAGE	Disable logging to any media. Makes the internal storage accessible to a connected computer. (CPT7 and CPT7700 only)
		1	USBSTICK	Use a USB stick as the mass storage device. (Not supported on CPT7 or CPT7700)	Enum	4	H
		2	INTERNAL_FLASH	Use Internal storage as the mass storage device.